Linear wipers

Biplastics
FB
RA
RA B
For telescopics
BP

- They are ready for delivery in linear strips.
- The Biplastic oil wipers P.E.I. are supplied shaped according to the customers’ design.
RA 01 BP
Profile: Polyurethane
Length: 2000 mm.
Rigid polymer insert
RA 03 BP
Profile: Polyurethane
Length: 2000 mm.
Rigid polymer insert
RA 05 BP
Profile: Polyurethane
Length: 2000 mm.
12 × 3 steel insert
FB 40FLEX
Profile: Polyurethane
Length: 2000 mm.
18 × 3 steel insert
Oil wipers with this symbol can be purchased online in the PEI SHOP
FB oil wipers

- They are ready for delivery in linear strips.
- The FB oil wipers are supplied shaped according to the customer’s design or supplied in linear strips.
FB 14
Profile: Polyurethane *
Length: 530 mm.
Stainless steel reinforcement
FB 18
Profile: Polyurethane *
Length: 3000 mm.
Stainless steel reinforcement
FB 18L
Profile: Polyurethane *
Length: 1000 mm.
Stainless steel reinforcement
301 stainless steel shield
FB 25
Profile: Polyurethane *
Length: 3000 mm.
Stainless steel reinforcement
FB 25L
Profile: Polyurethane *
Length: 1000 mm.
Stainless steel reinforcement
301 stainless steel shield
FB 27
Profile: NBR *
Length: 500 mm.
Galvanized steel reinforcement
301 stainless steel shield
* Ready for delivery
Oil wipers with this symbol can be purchased online in the PEI SHOP
RA oil wipers

- The RA oil wipers are supplied shaped according to the customer’s design or supplied in linear strips.
RA 01
Profile: NBR * or Viton® *
Length: 560 mm.
Steel insert
Prompt delivery
RA02
Profile: NBR * or Viton® *
Length: 560 mm.
Steel insert
RA03
Profile: NBR *
Length: 560 mm.
Steel insert
RA04
Profile: NBR *
Length: 560 mm.
Steel insert
RA05
Profile: NBR * or Viton® *
Length: 560 mm.
Steel insert
RA06
Profile: NBR *
Length: 560 mm.
Steel insert
RA 25L
Profile: NBR *
Length: 800 mm.
Steel insert
Protection plate in stainless steel 301
RA 39L
Profile: NBR *
Length: 800 mm.
Steel insert
Protection plate in stainless steel 301
*Ready for delivery
Oil wipers with this symbol can be purchased online in the PEI SHOP
RA B oil wipers

- The RA B codes consist of a metal insert on which an NBR profile has been vulcanised
The oil wipers are supplied in linear strips
RA B1
Profile: NBR *
Length: 560 mm.
Steel insert
RA B2
Profile: NBR * or Viton® *
Length: 560 mm.
Steel insert
RA B3
Profile: NBR *
Length: 560 mm.
Steel insert
*Ready for delivery
Oil wipers with this symbol can be purchased online in the PEI SHOP
Oil Wipers For Telescopic Covers

These types of wipers are normally applied to telescopic covers.
The oil wipers keep the surface clean and prevent the chips from entering under the plates.
They must be resistant to heat and refrigerants, therefore they are supplied in polyurethane, with or without a protective stainless steel screen.
Characteristics

These types of wipers are normally applied to telescopic covers:
Codes PR 2 and PR 3 has steel reinforcement and polyurethane profile.
Codes PR 4A and PR 4A D can be instantly replaced on the telescopic cover, without disassembling the cover itself.
They have a metal reinforcement with a seal designed to clean the cover.
Code PR 5 is suitable for large-sized telescopic covers. No protrusion from box results in better protection from chips
and an aesthetically pleasing appearance of the telescopic cover.
Ready for delivery in linear strips.
PR 2
Profile: Polyurethane *
Length: 3000 mm.
Steel reinforcement
PR 3
Profile: Polyurethane *
Length: 3000 mm.
Steel reinforcement
PR 4A
Profile: Polymer GM2319
Length: 3000 mm.
Metal reinforcement
For working
with COOLANTS
PR 4A D
Profile: Polymer GM2357
Length: 3000 mm.
Metal reinforcement
For DRY
working

Materials

Wiper materials intended for telescopic covers